ClarkDietrich CDMB 4" X 10" 12 GA BRIDLE HANGER

FOR ATTACHING FLOOR JOISTS TO STRUCTURAL STEEL BEAMS OR WOOD LEDGERS

Bridle Hangers are commonly used to attach light-gauge C-joists to structural steel beams or wood ledgers. Connections can be made with screws, powder-actuated fasteners, drill-in concrete anchors or welding.Single and double-wide bridle hangers are also available in other widths and depths.

Product Data & Ordering Information

Coating: G90ASTM: A653/ A653MClick the below Product Code to view Tech Datasheet: Product code Gauge Mil Designthickness (in) Width (W) (in) Depth (H) (in) PackagingPcs./Carton CDMB 4x10 12 97 0.1017 4 10 15

Packaging

CDMB 4 X 10: 15 Hangers per box

Installation

Attach bridle hanger to the primary frame as specified. When welding the hanger to the primary frame, a minimum of 1/8" x 2" fillet weld on each top flange is required. Distribute the weld equally on both top flanges. Uplift loads do not apply to weldon applications. Place joist into hanger and secure with fasteners. If bridle hanger is less than beam depth, provide back blocking.